Optech Technology Co, Ltd.

Products List
1.25Gbps BIDI BWDM SFP Transcevier SFP-BX-D/U

1.25Gbps BIDI BWDM SFP Transcevier SFP-BX-D/U

Optech 1.25Gbps SFP can fully support BIDI/BWDM/Bidirection application. The bi-directional wavelength division multiplexing (BWDM) interface carries two distinct channels in different directions on a single strand of fiber. This provides a 100% improvement in fiber utilization since only a single fiber strand is required. You can effectively...
1.25Gbps SFP Transceiver SFP-SX/LX/LHX/EX/ZX/EZX/UZX

1.25Gbps SFP Transceiver SFP-SX/LX/LHX/EX/ZX/EZX/UZX

Optech 1.25Gbps SFP series (small form-factor pluggable, also called min GBIC) is a hot-pluggable transceiver used for both telecommunication and data communications applications. It interfaces a network device for a switch, router, media converter or similar device to a fiber optic or copper networking cable. And SFP transceivers are designed to...
1.25Gbps CWDM SFP Transceiver CWDM-SFP 20/24/27/30/32dB

1.25Gbps CWDM SFP Transceiver CWDM-SFP 20/24/27/30/32dB

Optech offers SFP with Coarse Wavelength Division Multiplexing (CWDM) is the technique of combining several optical channels onto a single fiber. CWDM systems typically provide 16 wavelengths and use the ITU standard 20nm spacing from 1270nm to 1610nm.CWDM is a cost-effective solution for networks requiring fairly high bit rates, at minimal cost....
Copper SFP 10/100/1000Base-TX 1000Base-TX

Copper SFP 10/100/1000Base-TX 1000Base-TX

The OP6C-TX1-00-C is a 3.3V copper SFP Transceiver. It offers full duplex 1000Mbps Ethernet by transporting data over standard CAT 5 UTP cable, with RJ-45 connection. The system host (MAC) must enable SGMII auto-negotiation while OP6C-TX1-00-C is operated to setup the partner linking at one speed of 10/100/1000Mbps by 1000Base-T...
10Gbps SFP+ Transceiver Module SFP-10G-SR/LR/LRM/ER/ZR

10Gbps SFP+ Transceiver Module SFP-10G-SR/LR/LRM/ER/ZR

Optech 10Gbps SFP+ transceiver line, which supports from 300m up to 80km transmission reach though Multi-mode or Single-mode fiber. You can easily replace your current SFP+ transceivers with Optech SFP+ and expand your bandwidth and transmission range. Features * 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR, LR, ER, ZR *...
10Gbps SFP+ Direct Attach Cable DAC

10Gbps SFP+ Direct Attach Cable DAC

Optech SFP+ (Small Form-factor Pluggable Plus) 10 Gbps Interconnect are designed to meet the requirements of Small Form Factor industry standard SFF- 8431. And these SFP+ interconnects are designed to support the bandwidth transmission requirements and applications as defined by 10 Gbps Gigabit Ethernet and 8G , 10G Fibre Channel over Ethernet (...
10Gbps SFP+ Active Optical Cable AOC

10Gbps SFP+ Active Optical Cable AOC

Optech SFP+ AOC (Active Optical Cable) offers you a cost-effective and highly efficient, easily deploying solution for 10Gbps transmission connections within data center and short-range connection. We can offer customize lengths up to 100M. Features * Electrical interface compliant to SFF-8431 * Hot Pluggable * 850nm VSCEL transmitter, PIN...
10Gbps XFP Transceiver XFP-SR/LR/ER/ZR

10Gbps XFP Transceiver XFP-SR/LR/ER/ZR

Optech 10Gbps XFP transceiver line, which supports from 300m up to 80km transmission reach though Multi-mode or Single-mode fiber. You can easily replace your current XFP transceivers with Optech XFP and expand your bandwidth and transmission range. Features * Compliant with XFP-MSA INF-8077i * Compliant with 10GFC Fiber Channel Standard *...
40Gbps QSFP+ Transceiver SR4  MPO

40Gbps QSFP+ Transceiver SR4 MPO

Optech 40Gbps QSFP+ transceivers are compliant with QSFP+ MSA SFF-8436. It supports 4 channels at 11.2Gpbs per channels. Our QSFP+ transceivers have high reliability and performance for data centers deployment, which can increase density and optimize your networking’s capability. Features * QSFP MSA compliant * 4 independent full-duplex...
40Gbps QSFP+ Direct Attach Cable DAC

40Gbps QSFP+ Direct Attach Cable DAC

Optech QSFP+ Cables are designed for advanced cost-effective solution for short-distanced connection to 40Gbps. Our QSFP+ Cable supports both Ethernet and fiber channel standard, runs multiple data rate from 1Gbps up to 10Gbps per channel. Below are the features of our QSFP+ Cable * QSFP+ conforms to the Small Form Factor SFF8436 * Support IEEE...



Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.